Let's start with pictures of an older USB 1.1 Hi-Pro (original or clone, it doesn't matter for this comparison). NOTE that the four LED lights at the bottom are to the right of the 6-pin mini-DIN connectors. On all Hi-Pros that I know of (including this one in this picture, including the Hi-Pro 2) the LED lights are right of the 6-pin mini-DIN connectors.
Here's a view outside the case, see the LED lights are right of the 6-pin mini-DIN connectors.
Now scroll down to look at the four LED lights on the mini Pro below
Mini Pro LED1 is to the left of 6-pin mini-DIN connector (COM2)
Mini Pro LED2 is to the left of 6-pin mini-DIN connector (COM3)
--In other words the lights are on the left side of the 6-pin mini-DIN connectors
FYI Mini Pro LED3 is the light for PC connection
FYI Mini Pro LED4 (not shown) is the light for power
On the case you can see the clear plastic inserts that carry light to the top of the case.
Now if you go scroll down on this link >>Hi-Pro 2<< to find a picture of an original >>Hi-Pro 2<<, (I don't want to post a picture here) then you will see that the LED lights are to the right of the mini-DIN connectors just like all other Hi Pros.
I believe the mini Pro is a different board, not a clone.